Clarification from the agency

All U.S. Citizens

This position is being filled under the memorandum from the Under Secretary of Defense for Personnel and Readiness (USD(P&R)) "Expansion of Direct Hire Authority for Certain Personnel of the Department of Defense," dated October 15, 2021.

As an Electronics Engineer at the NH-0855-2 some of your typical work assignments may include:

• Serves as Device Engineer as a key member in the Modeling and Simulation team in support of the DMEA Foundry team.
• Responsible for the design and optimization of TCAD device simulations to accurately represent next generation SiC and/or Si power device behavior and performance.
• Responsible for executing device testing and characterization to ensure device operation. Performs measurements with semiconductor device parameter analyzers and semi-automated wafer probe systems, LCR meters, oscilloscopes, etc.
• Measures semiconductor devices at wafer-level or package-level to verify electrical behavior and extract key performance parameters.
• Assists the lead Process Control Monitoring (PCM) engineer to verify PCM test structure electrical behavior.
• Assists in the design of PCM test structures to validate process/device performance and monitor process stability using Cadence Virtuoso for design/layout activities.
• Identifies device requirements and key system performance parameters to analyze results from electrical/reliability testing and provides feedback to the Foundry team.

Conditions of employment

• Must be a U.S. Citizen
• Selective Service requirements apply. Please visit http://www.sss.gov for more information
• Suitable for Federal employment determined by required background investigation
• Must obtain/maintain Secret security clearance
• Drug Testing Designated position: Yes
• May be required to successfully complete a probationary period
• Financial Disclosure: Not Required
• Fair Labor Standards Act (FLSA): Non-Exempt
• Recruitment/Relocation/Retention Incentive may be authorized at Management's discretion.

Qualifications

Your application package must reflect the applicable experience to meet the Individual Occupational Requirements for the 0855 as listed below:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience - college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

**NOTE: Failure to provide transcripts will result in you being rated ineligible for this position.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

We will review your resume and supporting documents, to ensure you meet the basic qualification requirements. We will evaluate each applicant who meets the basic qualifications on the information provided and evaluate your relevant work experiences as it relates to fundamental competencies, identified below, required for this position. Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):

Competencies:

Traditional rating and ranking of applications does not apply to this vacancy. Your application (resume and supporting documentation) will be evaluated to determine if you meet the minimum qualifications required as listed on the announcement under qualification requirements.

Veterans Preference: If you are entitled to veterans preference, you should indicate the type of veterans' preference you are claiming on your resume. Your veterans' preference entitlement will be verified by the employing agency.

For information on entitlement see http://www.fedshirevets.gov/job/vetpref/index.aspx

Appointment of Military Spouses (5 CFR 315.612) (NonComp Mil Sp): To receive this preference, you must choose to apply using the "Appointment of Military Spouses (5 CFR 315.612) (NonComp Mil Sp)" eligibility. If you are claiming Military Spouse eligibility and are determined to be Well Qualified (score of 85 or above) for the position, you will be referred to the hiring manager. Information and required documentation for claiming Military Spouse eligibility may be found at the General Applicant Information and Definitions link below.

The documents you are required to submit vary based on the authority you are using to apply (i.e., applying as a veteran, applying as a current permanent Federal employee, applying as a reinstatement, etc.). Your complete application includes your COMPLETE resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further.

The following documents are REQUIRED

1. Your resume:

• IMPORTANT UPDATE: Your resume must not exceed two (2) pages. If your resume exceeds the two-page limit, you will be removed from consideration for this announcement. The resume and required supporting documentation should provide the minimum qualifications and relevant experience for the announced position. Must include the work schedule, hours worked per week, dates of employment, and duties performed. If multiple resumes are submitted by an applicant, only the last resume submitted will be reviewed for qualifications and referred for selection consideration, if eligible. The resume must not be more than 5MB and should be saved and uploaded as a PDF to maintain formatting and number of pages. We also accept GIF, JPG, JPEG, PNG, RTF, TXT, PDF, ODT or Word (DOC or DOCX). We do not accept PDF portfolio files. Page margins should be 0.5 inches, and font styles must be legible. Consider using 14-point size font for titles and 10-point for the main text. We recommend using a font like Lato, if available. Other widely available options are Calibri, Helvetica, Arial, Verdana, Open San Source Sans Pro, Roboto or Noro Sans.
• Additional guidance on writing a federal resume can be found at: USAJOBS Help Center - How do I write a resume for a federal job? The resume builder can help you create a resume using these recommendations and uses the information in your USAJOBS profile to help you get started.

• This position has a degree or education requirement, so you are required to submit a copy of your transcript.
• College transcript(s) required if qualifying based on education. We accept unofficial transcripts, as long as they contain your name, the name of the school, the date and degree that was awarded, and the list of classes and credits earned.

• All current and former civilian Federal employees must submit a copy of your MOST RECENT SF50 (Notification of Personnel Action) showing your tenure, grade and step, salary, and type of position occupied (i.e., Excepted or Competitive); or similar Notification of Personnel Action documentation, i.e., Transcript of Service, Form 1150, etc.

• If applying using veteran's preference or under a Veteran's hiring authority you must submit the following documents: DD214 showing character of service, SF-15 Form and VA letter showing final percentage, or certification of expected discharge or release from active duty.

Next steps